Inline Pneumatic Capping System (2001 - 3000)
Inline Pneumatic Capping System
GENERAL CHARACTERISTICS
-
Pneumatic Hand Held Capper
The caps are placed by hand. This unit has an adjustable torque setting, which will enable you to set the desired torque that you require for your container and cap.
Each time the trigger is depressed and the unit is applied with pressure onto the bottle by the operator, the cap will be tightened to the pre-set torque.
Change part heads are available for different cap sizes. A stand with a balancing unit is also supplied, so that the cap torque unit can be suspended by means of a spring loaded cable from an elevated arm. This means that the operator can simply pull the unit down onto a container without having to continually support its weight.
(Weight 20kg)
-
Electric Hand Held Capper
The caps are placed by hand. This unit has an adjustable torque setting, which will enable you to set the desired torque that you require for your container and cap.
Each time the trigger is depressed and the unit is applied with pressure onto the bottle by the operator, the cap will be tightened to the pre-set torque. A tapered silicone rubber insert on the capping head transfers the torque from the motor the cap. This rubber is a consumable.
Change part heads are available for different cap sizes. A balancing unit is also supplied, so that the cap torque unit can be suspended by means of a spring loaded cable from an elevated arm. An additional stand can be supplied. This means that the operator can simply pull the unit down onto a container without having to continually support its weight.
(Weight 10kg)
Ask for Information
Single Head Peristaltic Pump Filler
GENERAL CHARACTERISTICS
- A single head Peristaltic pump filling machine is a portable machine and can be easily transported to various workstations.
- The filler fills a pre-select amount of product into a container.
- The filling volume is infinitely adjustable.
- The filling accuracy, product being filled and the container size will determine the correct size pump to be used.
- The machine can either be operated in manual or automatic mode. In manual, the operator needs to press the start button to start one filling cycle. In automatic, the operator needs to press the start button once and the machine will start the filling cycle.
- After each cycle there will be a short time delay for the operator to place the next bottle under the nozzle before the filling cycle continues.
- Filling speed depends on size of container / bottles and viscosity of liquid/product.
- To ensure good filling accuracy and repeatability, product needs to be supplied to the machine at a constant pressure or a Balance tank needs to be used.
Ask for Information
If you are interested in one of our solutions or if you want to get more information,
our experts are at your disposal.
GP: Unit S4 The Dozen, 36 Venturi Crescent, Centurion, 0157
DBN: 2 Ncondo Place, Ridgeside Rd, Durban, 4319
CTP: 30 Marconi Street, Montague Gardens, 7441
info@inpaktgroup.co.za / sales@inpaktgroup.co.za
Mobile Direct: 081 373 9154
+27 010 020 2434
+27 031 020 0193
+27 021 020 0403