Up to a 12 PC Pump Filler

GENERAL CHARACTERISTICS

A 12 head PC pump filler is a fully automatic machine which fills a pre-select amount of product into a container.
PC pumps are sized to suit your product viscosity and size of solids in suspense.
The bottles enter the machine on a conveyor (not included); a pneumatic gate system allows the containers to stand under the filling heads and keeps the rest of the containers isolated on the conveyor line.
The filling operation then starts to the pre-set count.
Each filling nozzle is fitted with its own positive shut off valve, which shuts off the product flow once filling is completed and prevents excess dripping.
The machine is fitted with a short stroke diving system.
A Drip Tray can be added to alleviate dripping on the filled containers.
A product hopper tank is supplied with the machine, which is pneumatically controlled by means of modulating valve or probe or mercury switch.
For the 12 Head option the 6 PC Pumps are used but while the filling cycle is completed on the one side and bottles exit the filling area, the filling cycle is already started at the rear 6 heads.
Filling cycles alternate between the two 6 Head filling banks that is mounted back to back and using the same 6 pumps.
PLC Controlled
Fully automatic
Positive shut off valves
Filling speed depends on size of container / bottles and viscosity of liquid / product

Ask for Information

A single head Peristaltic pump filling machine is a portable machine and can be easily transported to various workstations.
The filler fills a pre-select amount of product into a container.
The filling volume is infinitely adjustable.
The filling accuracy, product being filled and the container size will determine the correct size pump to be used.
The machine can either be operated in manual or automatic mode. In manual, the operator needs to press the start button to start one filling cycle. In automatic, the operator needs to press the start button once and the machine will start the filling cycle.
After each cycle there will be a short time delay for the operator to place the next bottle under the nozzle before the filling cycle continues.
Filling speed depends on size of container / bottles and viscosity of liquid/product.
To ensure good filling accuracy and repeatability, product needs to be supplied to the machine at a constant pressure or a Balance tank needs to be used.

Ask for Information

If you are interested in one of our solutions or if you want to get more information,
our experts are at your disposal.

GP: Unit S4 The Dozen, 36 Venturi Crescent, Centurion, 0157

DBN: 2 Ncondo Place, Ridgeside Rd, Durban, 4319

CTP: 30 Marconi Street, Montague Gardens, 7441

Mobile Direct: 081 373 9154

+27 010 020 2434

+27 031 020 0193

+27 021 020 0403